* If you want to update the article please login/register
Detergent nonlinearity effects arise due to the interference between the laser's forward signal and the Rayleigh backscattered one, which is re-forwarded by the laser itself toward the photodetector, in the context of Radioastronomical applications where the Analog Radio-over-Fiber device is used for the antenna downlink. The adoption of the so-called dithering technique, which requires the direct modulation of the laser with a sinusoidal tone and exploits the laser's chirping phenomenon, has been shown to minimize such Rayleigh Back Scattering -induced nonlinearities. A progressive decrease in the dithering tone frequency is shown by a detailed review of dithered Radio over Fiber systems, affecting in a peculiar way both the field emitted by the laser and the received signal's spectrum pattern at the fiber end.
Source link: https://arxiv.org/abs/2207.00224v2
A common feature in nature is a free-flowing fluid coupled to a porous substrate, such as a river or lake lying over a porous bed. Thermal convection can occur and may be restricted to the clear fluid zone, forming shallow convection cells, or it can penetrate into the porous medium, forming deep cells, depending on the environmental conditions. In the physically feasible limit of a small Darcy number, the coarse-grained model yields a straightforward equation for the change between deep and shallow convection. Small, random initial data, transitions into a non-responsive shallow state, and landfalls in the desired steady state of deep convection are all present in this hybrid shallow-to-deep convection. To each contiguous state, we developed a phase diagram that incorporates results from all three methods and depicts the regions in parameter space that give rise to each concentric region.
Source link: https://arxiv.org/abs/2207.05889v1
In energy management system applications, the power system transmission network topology is used. Substation configurations are essential to transmission network topology processing. Due to the variable nature of wind and solar power plants, modern power systems based on renewable energy sources require reliable and fast network topology processing. Currently used transmission network topology processing, which is based on the relay signals sent through SCADA's wireless connectivity, is neither highly reliable or highly accurate. On a real-time digital simulator, a modified two-area four-machine power system model with two grid connected solar PV plants composed of MTBA, RBA, and SBA is simulated.
Source link: https://arxiv.org/abs/2207.05603v2
* Please keep in mind that all text is summarized by machine, we do not bear any responsibility, and you should always check original source before taking any actions