Advanced searches left 3/3

Cds - PubMed

Summarized by Plex Scholar
Last Updated: 18 November 2022

* If you want to update the article please login/register

Construction of Ag2CO3/BiOBr/CdS ternary composite photocatalyst with improved visible-light photocatalytic activity on tetracycline molecule degradation.

Photocatalytic degradation was considered as the most effective method for removing antibiotic drug pollution from wastewater by photocatalytic degradation. Under visible light irradiation, the ABC composite was used to investigate the degradation of tetracycline. According to the 0. 9 percent decline in TC in 70 minutes, it is approximately 1. 5 times higher than Ag2CO3, 1. 28 times higher than BiOBr, and 1. 1 times that of BC catalyst, respectively. The effect of operational parameters such as, TC concentration, catalyst dosage, and initial pH were investigated on TC degradation activity. The photocatalysis reaction that was clearly demonstrated in electron paramagnetic resonance experiments was demonstrated by a Quenching experiment that showed that u00b7OH and O2u00b7- played a significant role in the Quenching experiment. In addition, the catalyst showed high performance in both reusability and stability tests due to the synergistic effect between its components. Based on the detailed review, the process of degradation of TC in the ABC composite was suggested.

Source link: https://doi.org/10.1016/j.jes.2021.10.021


Surfactant-Modified CdS/CdCO3 Composite Photocatalyst Morphology Enhances Visible-Light-Driven Cr(VI) Reduction Performance.

CdCO3 elliptical spheres were formed by increasing CdS nanoparticles in the cubic crystal structure of CdCO3's visible-light-driven composite photocatalyst, which, after surfactant modification, resulted in the formation of CdCO3 elliptical spheres. Cd2+ from CdCO3 can penetrate the CdS crystal structure to cause lattice distortion and form hole traps, which have effectively promoted the isolation and transfer of CdS photogenerated electron-hole pairs. The prepared 5-CdS/CdCO3@SDS displayed excellent Cr photocatalytic performance with a reduction rate of 86. 9% within 30 minutes, and the reduction rate was 0. 0675 min-1, which was 15. 57 and 14. 46 times higher than CdS and CdCO3 respectively.

Source link: https://doi.org/10.3390/nano12213923


Fabrication of a Ternary Nanocomposite g-C3N4/Cu@CdS with Superior Charge Separation for Removal of Organic Pollutants and Bacterial Disinfection from Wastewater under Sunlight Illumination.

UV-visible absorption spectra determined the catalytic capacity of the methylene blue dye and drug degradation. Various compositions of/Cu@CdS nanocomposite, 20%, 30%, 40%, 50%, 60%, and 60% of g-C3N4 NCs were made. The results show that 5%Cu@CdS and 40%g-C3N45%Cu@Cds demonstrated maximum antibacterial activity and photocatalytic degradation of dye and polyethylene. No significant change was observed in doped and pristine CdS nanoparticles by the X-ray scheme. The fabricated ternary nanocomposite against MB dye and ciprofloxacin an antibiotic drug makes it a viable alternative for solving environmental challenges because of its fast photocatalytic degradation activity.

Source link: https://doi.org/10.3390/toxics10110657


Ultralong Lifetime of Plasmon-Excited Electrons Realized in Nonepitaxial/Epitaxial Au@CdS/CsPbBr3 Triple-Heteronanocrystals.

Due to the ability to obtain long-lived plasmon-induced hot electrons, a combination of the excellent light absorber power of plasmonic metals and the superior charge carrier dynamics of halide perovskites is appealing for bio-inspired solar-energy conversion. The resulting Au@CdS/CsPbR3 HNCs produce remarkably long-lived plasmon-induced charge carriers with a lifetime of up to nanoseconds, which is many orders of magnitude longer than those developed for colloidal plasmonic metal-semiconductor systems.

Source link: https://doi.org/10.1002/adma.202207555


Enhanced photocatalytic hydrogen evolution by piezoelectric effects based on MoSe2/Se-decorated CdS nanowire edge-on heterostructure.

One of the most promising ways to discourage photogenerated carrier recombination is to build a built-in electric field by the building of heterojunction. For effective H2 production by two-pot hydrothermal synthesis, we present a piezo-photocatalytic device made of Se-decorated CdS nanowires and few-layered edge-on MoSe2 nanosheets. Detailed edge locations for hydrogen evolution reaction were found on the few-layered MoSe2 exposing numerous edge locations for hydrogen evolution reaction. As a result, the HER of 20-MS/CSS's piezo-photocatalysis at 900 rpm was 59. 1 mmol h-1 g-1, which was 1. 25 times higher than 20-MS/CSS' for photocatalysis.

Source link: https://doi.org/10.1016/j.jcis.2022.10.120


Vacancy-induced tensile strain of CdS/Bi2S3 as a highly performance and robust photocatalyst for hydrogen evolution.

The Lattice strain is a new initiative in order to produce more renewable energy. When sulfur vacancies are present in the Bi2S3 lattice, the surrounding atoms shift toward sulfur vacancies. Strain engineering updates the energy band structure to reduce the interface barrier height, thereby raising the interface charge transfer rate. In addition, density functional theory experiments investigated the effect of various strain regimes on the band structure and Gibbs free energy.

Source link: https://doi.org/10.1016/j.jcis.2022.10.056


Heterointerface Engineering of ZnO/CdS Heterostructures via ZnS layer for Photocatalytic Water Splitting.

A green option to solve the energy crisis and environmental pollution is solar-driven water splitting that results in clean and renewable hydrogen. Superior photocatalytic results were achieved by introducing the ZnS heterointerface layer between ZnO and CdS. By precisely regulating the heterointerface ZnS layer thickness and CdS shell thickness, the highest hydrogen generation rate of 156. 7 bcmol/ga00b7h was achieved.

Source link: https://doi.org/10.1002/chem.202202662


Mechanism and principle of doping: realizing of silver incorporation in CdS thin film via doping concentration effect.

Ag doping's effect on the morphological, optical, and electrical properties of CdS thin films has been investigated in this report. Changes in the reaction of making CdS film preparation by the chemical bath deposition technique, as well as Ag ions, resulted in a change in the CdS film's geometric composition. The positions of peaks in the doped films were moved to wider angles in the crystal lattice constant, according to XRD. Ag is the most annealed Ag-doped Cds with 5% Ag has the most carrier content and lowest resistivity, according to the electrical results. According to the measurements, the optimal Ag ratio was achieved at Ag 5%, which encourages the usage of CdS in this ratio as an effective buffer layer on photovoltaic units.

Source link: https://doi.org/10.1039/d2ra04790j


Engineering the synthesized colloidal CuInS2 passivation layer in interface modification for CdS/CdSe quantum dot solar cells.

Interface enhancements are a common way to improve quantum dot sensitized solar cells' photovoltaic efficiency. With CdSQDs and CdSe QDs, the TiO2/CdSe solar cells are nourished, and a new interface is introduced to create a recombination center. In the CdS/CdSe QDSCs, the extracted charge amount is used to demonstrate charge separation effectiveness, indicating that we have achieved outstanding charge extraction success.

Source link: https://doi.org/10.1039/d2dt02555h


Encapsulated CdSe/CdS nanorods in double-shelled porous nanocomposites for efficient photocatalytic CO2 reduction.

Colloidal quantum dots have appeared as promising photocatalysts to convert CO2 into fuels by using solar energy. With double-shelled nanocomposites, we show that synchronizing imine polycondensation reactions to self-assembly of colloidal CdSe/CdS nanorods yields micro-meso hierarchically porous nanocomposites. The self-assembled porous nanocomposites demonstrate notably higher conduct in solid-gas regimes relative to those in nonporous solids made by self-assembled CdSe/CdS nanorods under identical conditions, as shown by their hierarchical pores and the ability to distinguish photoexcited electrons.

Source link: https://doi.org/10.1038/s41467-022-34263-z

* Please keep in mind that all text is summarized by machine, we do not bear any responsibility, and you should always check original source before taking any actions

* Please keep in mind that all text is summarized by machine, we do not bear any responsibility, and you should always check original source before taking any actions