Cavitation - Arxiv

Experimental study of cavitating flow influenced by heat transfer from heated hydrofoil

This research experimentally investigated the effect of heat transfer from a heated hydrofoil on cavitating flow to describe the evaporation phenomenon under high-heat-flux and high-speed conditions. In a NACA0015 hydrofoil made from copper, a temperature difference was created between the hydrofoil and mainstream by installing an aluminum nitride heater. In a high-temperature water cavitation tunnel at the Institute of Fluid Science, Tohoku University, a cavitation experiment was conducted. The effect of heating on cavitating flow, namely the cavitation number, was determined by varying the main velocity and pressure, which was adjusted to 860 W for a fixed heater power of 860 W. The fluid temperature near to the heated hydrofoil was affected by the turbulent convective heat exchange between the conventional and hydrofoil, which led to the use of a thermal correction term.

Source link: https://arxiv.org/abs/2207.02679v1

Boiling and cavitation caused by transient heat transfer in superfluid helium-4

q^* stands for the threshold heat flux above which boiling spontaneously occurs in He II, and is an important parameter that must be included in the design of several He II based cooling systems. We present a numerical investigation on the change of the He II's thermodynamic state in front of a planar heater by solving the He II two-fluid equations of motion. We determine the application heat flux beyond which the He II near the heater transits to the vapor phase.

Source link: https://arxiv.org/abs/2206.05419v1

* Please keep in mind that all text is summarized by machine, we do not bear any responsibility, and you should always check original source before taking any actions