Advanced searches left 3/3

Cathode Material - Springer Nature

Summarized by Plex Scholar
Last Updated: 27 September 2022

* If you want to update the article please login/register

Electrochemical performance of In_2O_3-coated LiFePO_4 as a cathode material in lithium-ion batteries

A new In_2O_3-coated LiFePO_4 cathode is successfully produced by the sol-u2013gel process. In_2O_3@LiFePO_4 cathode phase analysis and microstructure imaging are carried out. The In_2O_3@LiFePO_4 cathode's highest redox currents and best reversibility data, as shown by the best reversibility and best reversibility of the In_2O_3@LiFePO_4 cathode's best reversibility. Adding the In_2O_3 coating will enable the usage of LiFePO_4 cathode coatings in practice. Raman spectroscopy and XRD findings confirmed the existence of the LiFePO_4 phase with high crystallinity. The fabricated cathode crystallizes with a spherical-like appearance, according to SEM and TEM experiments. About 135 and 125 mA h gu22121, the In_2O_3@LFP cathode has high discharge and charging capacities, with high discharge and charging capacities. The In_2O_3@LFP cathode's highest redox currents and best reversibility are shown by the highest redox currents and best reversibility. These unique electrochemical properties of the In_2O_3@LFP electrode encourage the manufacture of new cathode electrode materials.

Source link: https://doi.org/10.1007/s10971-022-05927-5


Cobalt-free Li-rich high-capacity cathode material for lithium-ion cells synthesized through sol–gel method and its electrochemical performance

Due to their high specific capability and superior energy density, Lithium-rich layered cathode materials are regarded as promising lithium-ion batteries. The Li_1. 17Ni_0. 34Mn_0. 44 mAh gu22121, respectively, had an irreversible capacity of 78. 4 mAh gu22121 and a 76% coulombic efficiency in the first cycle when subjected to charge/charge cycle at C/10 rate in the voltage window of 2. 0_u20134. 8 V, with an irreversible capacity of 75. 6 percent and a 65% ru20134. 8 percent in the gu22121, gu22121 g gu22121 gu22121, gu2 gu21121, gu22121, gu2013bu2013 gu20134 gu22121, with an irreversible capacity of 76%. After 100 cycles and 85 percent at 1C after 150 cycles, cycling statistics showed a capacity retention of 91. 6 percent at C/10.

Source link: https://doi.org/10.1007/s11581-022-04725-x


Synthesis and enhanced electrochemical performance of LiNi_0.5Mn_1.5O_4 cathode materials under the assistance of polyvinylpyrrolidone

The effects of PVP molecular weights on LiNi_0. 5Mn_1. 5O_4's physical, morphology, and electrochemical properties are investigated. PVP molecular weights have a major effect on particle morphology. Primary particle size gradually decreases, while secondary particle distribution becomes more uniform as a result of the increase of molecular weight. Compared to LNMO-PVP_M and LNMO-PVP_H, the LNMO-PVP_L particle has more 110 surface area than 111 and 100. PVP addition to LiNi_0. 5Mn_1. 5O_4's electrochemical results, including higher crystallinity, higher cation disordering degree, smaller primary particle size, and more uniform secondary particle distribution are all shown by electrochemical analysis.

Source link: https://doi.org/10.1007/s11581-022-04744-8


Magnetic field effect and controlling of Li amounts of cathode material for high performance in LIC

A high surface area of activated carbon for Li ion capacitor has been created by limiting the LiOH values for surface modification. The final sample had hydrophilic groups or hydrophilicity, which leads to an increase in the electrolyte's permeability through the working electrode, according to a surface functional group review. In addition, the 3LYP80F test performed better than other samples, showing that the material is a promising electrode material for high-performance LICs.

Source link: https://doi.org/10.1007/s10008-022-05292-x


LiZr_2(PO_4)_3 surface coating towards stable layer structure Li_1.2Mn_0.54Ni_0.13Co_0.13O_2 cathode materials with long cycle performance

The LZPO layer not only has the functionality of a traditional coating layer to reduce the occurrence of side reactions between electrolyte and LMNCO surface, but also promotes the emergence of spinel phase in the layered structure, increases the amount of lattice oxygen, and reduces the amount of absorbed oxygen. Hence, LZPO coated LMNCO has a more stable layered surface during cycling than pure LMNCO, which extends its long life and high temperature results in cycling.

Source link: https://doi.org/10.1007/s12274-022-4897-y


Insight mechanism of nano iron difluoride cathode material for high-energy lithium-ion batteries: a review

Iron fluoride is a promising candidate for lithium-ion batteries due to its high theoretical energy density compared to other commercial cathode materials such as LiCoO_2 and its abundance. However, the actual energy density of various FeF_2 materials today is lower than the theoretical one. The amount of Li++ that can transport is determined by the amount of Li++ that can transport, as well as electron transfer between FeF_2 particles, electron transfer between FeF_2 particles, Li+ transport from the electrolyte to FeF_2 particles, Li+ migration within a FeF_2 particle, Li+ transport from FeF_2 particles, Li+ transport from FeF_2 particles, Li+ transport from the electrolyte to FeF_2, Li+.

Source link: https://doi.org/10.1007/s10008-022-05287-8


BIAN-based durable polymer metal complex as a cathode material for Li–O_2 battery applications

However, most of the preparation methods used to produce these bifunctional oxygen reduction reaction and oxygen evolution reaction catalysts do not yield high temperatures and low yields, and determining the active locations qualitatively and quantitatively is therefore difficult. For Liu2013O_2 battery applications, we recommend the use of atomically dispersed metal centers coordinated to diimine moieties of conjugated polymers as bifunctional catalysts. The Poly iron complex catalysts showed high OER activities, enabling 100% coulombic yield for 160 galvanostatic charge discharge cycles with a capacity limit of 500 mAh/g at a new density of 250 mA/g at a new density of 250 mA/g. Conducting polymer assistance with atomically dispersed metal centers for oxygen reduction and evolution reaction catalysis is a promising way to extend Liu2013O_2's cyclability. We provide a novel, reliable, and cost-effective noble metal free polymer catalyst for Li air battery application.

Source link: https://doi.org/10.1038/s41428-022-00699-9


Preparation and electrical properties of cathode material based on zinc-doped Sr_2Fe_1.5Mo_0.5O_6 for solid oxide fuel cells

By combustion method, a unique solid oxide fuel cell cathode material based on Zn-doped Sr_2Fe_1. 5Mo_0. 5O_6 is synthesized. When Fe element in Sr_2Fe_1. 5Mo_0. 5O_6 is partially replaced by Zn, the results show that Sr_2Fe_1. 5Mo_1_u2212 x Zn_6-U0312 x Mo_0. 5O_6- x Mo_0. 5O_6-U5312 x Zn_0_6- x Mo_0. 5O_6 (Fig. til_0. 6O_6 is partially replaced by Zn_1_2Fe_2Fe_2Fe_2Fe_2Fe_0. 6O_3u22121212121212121212121212121212121212121212121212121212121212121212121212121212121212121212121212121212121212121212121212121236121612121212121212121612121212121212121212121216121212121236121212121212121212121612121612 Using wet H_2, electrochemical results of a symmetric cell with the design of SFZn x M/SDC/SFZn x M are evaluated. Sr_2Fe_1. 5_u2212 x Zn_5M_6- (U03b4) is a potentially cathode material for solid oxide fuel cells, as a result.

Source link: https://doi.org/10.1007/s10854-022-08954-8


Effect of conducting polymer incorporated heterostructure morphology of MgCo_2O_4@PPy nanosheets: a novel cathode material for asymmetric supercapacitor applications

The simple hydrothermal synthesis of Magnesium (u2013cobalttite MgCo_2O_4 spinel with various morphologies, such as nanosheets and nanospheres has been investigated in this study. MgCo_2O_4@PPy has a larger area of 103 m2 gu22121 than MgCo_2O_4@PPy, which has a greater area of 73 mu22121, according to the results of N2 adsorption/u2013desorption, which covers a wide region of 73 m2gu22121. In a variety of applications, the synthesized electrode material with inventive nanoarchitectures demonstrated good electrochemical results. MgCo_2O_4@Ppy/AC recovered 84% after 10,000 cycles at 5 Ag22121, a remarkably high energy density of 40 Whkg/u22121, with a power density of 1544 Wkg/u22121, with an impressive peak capacity retention of 84%.

Source link: https://doi.org/10.1007/s10854-022-08949-5

* Please keep in mind that all text is summarized by machine, we do not bear any responsibility, and you should always check original source before taking any actions

* Please keep in mind that all text is summarized by machine, we do not bear any responsibility, and you should always check original source before taking any actions