Advanced searches left 3/3

Cathode Electrochemical Machining - Crossref

Summarized by Plex Scholar
Last Updated: 06 November 2021

* If you want to update the article please login/register

Cathode Structure Optimization and Process Experiment in Electrochemical Machining of Multi-stage Internal Cone Hole

With the problems of processing voltage 10 V, electrolyte inlet pressure 1. 5 MPa, electrolyte temperature level 28 ℃ and cathode feed speed 5mm/min, the ECM processing of multi-stage inner cone hole was brought out by utilizing the enhanced cathode. Study reveals that the optimization of cathode structure with computer system simulation can reduce the cathode advancement cycle and lower the cost of cathode design efficiently in ECM, which provides a viable and reliable technique for the optimization of complicated cathode framework.

Source link: https://doi.org/10.21203/rs.3.rs-994118/v1

* Please keep in mind that all text is summarized by machine, we do not bear any responsibility, and you should always check original source before taking any actions

* Please keep in mind that all text is summarized by machine, we do not bear any responsibility, and you should always check original source before taking any actions