Advanced searches left 3/3

Acrylic - Europe PMC

Summarized by Plex Scholar
Last Updated: 10 December 2022

* If you want to update the article please login/register

Clinical Outcomes of Metal-Ceramic versus Metal-Acrylic Resin Implant-Supported Fixed Complete Dental Prostheses: A Systematic Review and Meta-analysis.

If quantitative results for the following variables were obtained, clinical results of metal-acrylic resin IFCDPs were compared to those of metal-ceramic IFCDPs, incidence of peri-implant mucositis, prevalence of peri-implant mucositis, incidence of peri-implant mucositis, prevalence of peri-implant mucositis, prevalence of peri-implant mucositis, rate of peri-implant mucos, the following data were reported by clinical findings were not included: implant failure, epidemiology, epidemi, incidence, risk, incidence of metal-im, incidence of metal-ceramic IFCDPs, incidence of peri-implant mucos, incidence of peri-implant mucos, risk, incidence of peri-implant mucos, incidence, incidence of peri-implant mucos, incidence of peri-implant mucos, prevalence, incidence, prevalence, incidence of peri-implant mucos, prevalence, incidence, peri-implant However, meta-analysis showed a significantly elevated risk of developing peri-implantitis at the implant level in the metal-acrylic company in comparison to the metal-ceramic group. In contrast to metal-ceramic IFCDPs, a higher incidence of other medical disorders such as peri-implant mucost and peri-implant mucosal recession, as well as prosthetic problems such as abrasion and veneer fracture were found in the literature. Conclusions from the available data show that a higher incidence of biologic and prosthetic disorders, as well as a higher risk of peri-implanttitis, are present in metal-acrylic resin IFCDPs relative to metal-ceramic IFCDPs.

Source link: https://europepmc.org/article/MED/36484660


Flexural vibration properties of particle board using acrylic emulsion adhesives with differential glass transition temperature

In considering a building's indoor environment, vibration characteristics of wood-based materials is one of the primary parameters. Both loss tangents of dynamic viscoelasticity and flexural vibration properties were measured. Tg = 13 b0C plus blended AE was found in the apparent activation energy calculated from the master curve's shift factor, which varied depending on the Tg of AE and was particularly high for AE with Tg = 13 b0C and blended AE.

Source link: https://europepmc.org/article/MED/IND607699451


Prosthetic complications and survival rates of metal-acrylic implant fixed complete dental prostheses: A retrospective study up to 10 years.

Purpose of this retrospective clinical study The aim of this retrospective research was to determine the prosthetic adherence and complication rate in patients treated with metal-acrylic resin implant-supported complete dentures. Methods and methods The Dental College of Georgia's patient record system was searched from 2006 to 2020 to identify all patients treated with ma-IFCDs by the graduate prosthodontic and general practice residents during this period. Results From the electronic health assessment, there were 84 arches in 55 patients who fulfilled the inclusion criteria. 43 were maxillary and 41 were mandibular, out of 84 complete arch prostheses. At 5 years and 42 percent at ten years, the ma-IFCDs had a 54% survival rate over five years and 32 percent at ten years. Conclusions Mid- to long-term survival rates for ma-IFCDs are worryingly poor. The most common complication was catastrophic crack of the acrylic resin superstructure, followed by the wearing of the acrylic resin denture teeth.

Source link: https://europepmc.org/article/MED/36460490


Recyclable cyclic bio-based acrylic polymer via pairwise monomer enchainment by a trifunctional Lewis pair.

Polymer polymers made entirely of a single monomer type can only be obtained by a few cyclic polymers from a single monomer type, and the synthesis of such authentic cyclic polar vinyl polymers devoid of foreign motifs remains a challenge. We recommend that macrocyclic intermediates and transition states consisting of two catalyst molecules be included in the catalyst-regulated ring expansion and eventual cyclization, resulting in genuine c-PMMBL rings and simultaneously regenerating the catalyst while simultaneously regenerating the catalyst.

Source link: https://europepmc.org/article/MED/36443531


Modelling viscoelastic relaxation mechanisms in thermorheologically complex Fe(III)-poly(acrylic acid) hydrogels.

Hydrogels with reversible transition metal-polymer crosslink crosslinks can be flexibly tuned, depending on the metal bond's dissociation kinetics. We use rheology to investigate the sol-gel transition of a Fe-poly network with differing crosslinker content and model the corresponding mechanical relaxation at different stages of gelation. A time-temperature superposition process is introduced for both processes separately to account for chain and crosslinker dynamics, effectively separatering the dynamic processes in these thermorheologically complex dynamic networks. Chain relaxer's activation energy remains unchanged, whether or not the chain participates in the network. We incorporate results from fractional viscoelasticity with a generalized Maxwell model, which explains the dynamics of unentangled chain solution with reversible crosslinks.

Source link: https://europepmc.org/article/MED/36317679


Theoretical and Experimental Insights of Benzimidazole Catalyzed by the Epoxy-Acrylic Acid Reaction.

A reaction of diglycidyl ether of bisphenol-A-based epoxy resin and acrylic acid, as a catalyst, was produced by Epoxy acrylate vinyl ester resin using benzimidazole as a catalyst. The product's FTIR analysis revealed a clear increase esterification reaction between the epoxide group and the carboxylic group of acrylic acid, excluding the side reactions.

Source link: https://europepmc.org/article/MED/36432000


In Vitro and In Vivo Evaluation of Hydroxypropyl-β-cyclodextrin-grafted-poly(acrylic acid)/poly(vinyl pyrrolidone) Semi-Interpenetrating Matrices of Dexamethasone Sodium Phosphate.

Polyvinyl pyrrolidone, acrylic acid, and hydroxypropyl-beta-cyclodextrin were all present together with ammonium persulphate as initiator and crosslinker, allowing for the creation of a hydrogel system with optimal swelling at distal intestinal pH. This formulation was capable of releasing a small amount of drug at acidic pH, but a maximum number of drugs was released at colonic pH by the non-Fickian diffusion process. Without any contact with the DSP, successful components grafting of components and assembly of a semi-IPN system were demonstrated by the Infrared spectroscopy, which revealed excellent grafting of parts and the establishment of a semi-IPN system. On loading in the hydrogel, X-ray diffraction revealed a decrease in crystallinity of DSP. A rough and porous hydrogel surface was revealed by scanning electron microscopic photographs. The toxicological analysis of semi-IPN hydrogels revealed their bio-safety and hemocompatibility. Hence, AP-8 can be considered a potential carrier for targeted delivery of DSP to treat inflammatory bowel diseases.

Source link: https://europepmc.org/article/MED/36422529


Zinc-modified phosphate-based glass micro-filler improves Candida albicans resistance of auto-polymerized acrylic resin without altering mechanical performance.

For denture patients, auto-polymerized acrylic resin manufacturing by pathogenic Candida albicans is a common problem. There were no statistical differences between the control and the zinc-modified phosphate-based glass samples, according to the control group, although the number of C. albicans colony-forming units was significantly smaller in the control group. C. albicans tended not to adhere to the zinc-modified-phosphate-based glass microscopy results, according to Scanning electron microscopy.

Source link: https://europepmc.org/article/MED/36376540

* Please keep in mind that all text is summarized by machine, we do not bear any responsibility, and you should always check original source before taking any actions

* Please keep in mind that all text is summarized by machine, we do not bear any responsibility, and you should always check original source before taking any actions