Advanced searches left 3/3

Ablation - Arxiv

Summarized by Plex Scholar
Last Updated: 10 November 2022

* If you want to update the article please login/register

Fabrication of Surface-Enhanced Raman Spectroscopy Substrates Using Silver Nanoparticles Produced by Laser Ablation in Liquids

This paper explores the use of surface-enhanced Raman spectroscopy substrates based on colloidal silver nanoparticles produced by laser ablation of silver granules in pure water that are inexpensive, quick to produce, and chemically stable. To determine the optimal parameters, AgNPs' solutions, which were centered at 404 nm, were used to determine the optimal parameters. Here, the effects of the laser power, pulse repetition frequency, and ablation time on the Surface Plasmon Resonance peak of AgNPs solutions, which was centered at 404 nm. In addition, these substrates had no effect on the Raman spectrum profiles of rat blood samples that were mixed with them. The Raman spectral profiles of blood samples mixed with colloidal AgNPs were 14. 95 times more enhanced in comparison to thick blood smears on a clean piece of aluminum foil. The results on the application of inexpensive, simple-to-prepare Raman substrates may have the possibility of providing surface-enhanced Raman spectroscopy to laboratories in poor countries that lack funds.

Source link: https://arxiv.org/abs/2211.00939v1


Thermal Simulation of Millimetre Wave Ablation of Geological Materials

Using a millimeter wave source, this research is concerned about the numerical simulation of ablation of geological materials. To this end, a new mathematical model is created for a thermal approach to the problem, allowing for large scale simulations, but not being able to account for accurate modeling of power input into the rock due to the rock's strong temperature dependence. Initial results showing its capability for simulating the millimeter wave drilling process are then applied to obtain initial findings demonstrating the validated model's ability. The effects of the rock's surface have been investigated, highlighting the importance of knowing the physical processes that occur between the wave guide and the rock. It has been discovered that strata formed by similar rock types, such as granite and basalt, absorptive properties, pose no problem for uniform drilling.

Source link: https://arxiv.org/abs/2211.00681v1


A single liquid chromatography procedure to concentrate, separate and collect size-selected polyynes produced by pulsed laser ablation in water

Polyynes are linear carbon chains characterized by alternated single and triple bonds that are terminated by hydrogen or other terminal substitutes and terminated by other terminal substitutes. PLAL can be used as a solvent to prevent toxicity issues and save costs relative to organic solvents, and can be used as a solvent for PLAL. We synthesized polyynes by pulsed laser ablation in water in this work, and we adjusted the process parameters to increase the yield of polyynes by PLAL. Since the polyynes sample is an aqueous sample, we could inject it directly into the RP-HPLC column without the dilution step required in the case of a sample in an organic solvent.

Source link: https://arxiv.org/abs/2206.10325v2


Infuence of mass ablation on ignition and burn propagation in layered fusion capsules

After decades of study and new laser-driven inertial fusion experiments, rapid strides toward thermonuclear ignition have been demonstrated using capsule designs with cryogenic fuel layers. The dynamically growing hot spot and the dense surrounding fuel complicated interaction are a complex interplay. The mass ablation rate into the hot spot is determined by the temperature of the dense fuel, resulting in ablative inflows up to 4x faster than previous estimates, based on analytic theory and numerical simulations. This brings an enthalpy flux into the hot spot that is critical in determining the hot spot temperature, the ignition threshold, and subsequent burn propagation. Mass ablation on the ignition threshold is limited by a dimensionless parameter that adjusts according to the dense fuel's temperature.

Source link: https://arxiv.org/abs/2207.00093v2

* Please keep in mind that all text is summarized by machine, we do not bear any responsibility, and you should always check original source before taking any actions

* Please keep in mind that all text is summarized by machine, we do not bear any responsibility, and you should always check original source before taking any actions